Adventures In Audio

Q: How thick should acoustic treatment be?

Q: "I want to line the walls of my studio with absorbent materials. How thick should the absorbers be?"

If your recording room is too reverberant, then this reverberation will get onto your recordings. Reverberation can be added to a dry recording, but it can never be removed.

If your control room is too reverberant, then the sound that is bouncing around will color your judgment and you won't be able to monitor and mix accurately.

The solution in both cases is to apply acoustic treatment.

There are two common types of acoustic treatment. One is the porous absorber, the other is the panel absorber, also known as the membrane absorber.

Any material that is soft and full of air-pockets will function as a porous absorber. Examples include curtains (drapes), carpet, glass fiber loft insulation and mineral wool. Of these, mineral wool is normally preferred for its effectiveness and low cost.

Mineral wool is often supplied in slabs that are around 50 mm deep.

You will find that a surface covered with such slabs will absorb high frequencies almost completely. However it will not absorb low frequencies at all.

This has to do with the wavelength of audible sounds.

The wavelength of the highest frequency that is normally considered to be in the audible range, 20 kHz or 20,000 Hz, is around 17 mm.

However the wavelength of the lowest frequency that is normally considered to be in the audible range, 20 Hz, is 17 meters!

Clearly, absorption that is a mere 5 centimeters deep will have hardly any effect on a sound wave that is measured in meters.

As a rule of thumb, a porous absorber is effective for a wavelength that is four times its thickness, and all shorter wavelengths

So mineral wool that is 5 cm thick will absorb frequencies of 1700 Hz and above. Below 1700 Hz, it will be less and less effective.

In practical terms, it is effective to use porous absorption up to around 10 cm thick. For frequencies below that, panel absorbers are easier to find space for because they don't have to be so thick. We will discuss panel absorbers on another occasion.

Bear in mind that if you use only porous absorption, your room will become bass-heavy because of the low frequencies that are still bouncing around.

By the way, the photo shows an anechoic chamber where virtually all reverberation is absorbed.

Image credit: Binarysequence, CC BY-SA 3.0

Tuesday June 15, 2010

Like, follow, and comment on this article at Facebook, Twitter, Reddit, Instagram or the social network of your choice.

David Mellor

David Mellor

David Mellor is CEO and Course Director of Audio Masterclass. David has designed courses in audio education and training since 1986 and is the publisher and principal writer of Adventures In Audio.

Learn Pro Tools with our amazing range of video courses

Pro Tools video course catalog

Browse Pro Tools courses...

Learn Logic Pro with our amazing range of video courses

Logic Pro video course catalog

Browse Logic Pro courses...

Learn Cubase with our amazing range of video courses

Cubase video course catalog

Browse Cubase courses...

Audio Masterclass gives you all the technical knowledge and skills to bring your musical dreams to life

The Audio Masterclass Music Production and Sound Engineering Course

Get the most from your studio with the Audio Masterclass Music Production and Sound Engineering Course.

Learn more...

More from Adventures In Audio...

Your power amp is average - Here's why

Adding tube warmth with the Freqtube FT-1 - Audio demonstration

Adding tubes to a synth track with Freqport Freqtube

The tiny amp that does (nearly) everything

Can I unmix this track?

Why you need a mono amp in your system - Fosi Audio ZA3 review

Can you get great earbud bass with Soundpeats AIR4 Pro?

24 bits or 96 kHz? Which makes most difference?

16-bit vs. 24-bit - Less noise or more detail?

Are these earphones REALLY lossless? Questyle NHB12

Could this be your first oscilloscope? FNIRSI DSO-TC3

OneOdio Monitor 60 Hi-Res wired headphones full review

Watch me rebuild my studio with the FlexiSpot E7 Pro standing desk

Can a tiny box do all this? Testing the Fosi Audio SK01 headphone amp, preamp, EQ

Hi-Fi comfort OVER your ears? TRUEFREE O1 detailed review

Get the tube sound in your system with the Fosi Audio P3

Any studio you like, any listening room you like - For producers and audiophiles

Hidden Hi-Fi - The equipment you never knew you *didn't* need - Fosi Audio N3

Adding tubes to a jazz mix with Freqport Freqtube

Adding tubes to a rock master with Freqport Freqtube

Adding tubes to female vocals with Freqport Freqtube

Adding tubes to male vocals with Freqport Freqtube

Adding tubes to real drums with Freqport Freqtube

Adding tubes to a bass guitar with Freqport Freqtube