An Introduction to Compression: Basic Compression - A Free Guide from Audio Masterclass

An Introduction to Equalization - A Free Guide from Audio Masterclass

Equipping Your Home Recording Studio - A Free Guide from Audio Masterclass

Why a soundproof recording studio needs ventilation

A post by David Mellor
Thursday January 01, 2004
If you soundproof a studio, you automatically airproof it. You need to breathe, don't you?
Why a soundproof recording studio needs ventilation

Ventilation and air conditioning, sometimes known as HVAC (the 'H' stands for 'heating') is a vitally important topic to study in conjunction with soundproofing. When a studio is sound proof, it is also air proof, unless steps are taken.

Ventilation and air conditioning are not synonymous. Ventilation means access to fresh air from outside the building, air conditioning means cooling and maintaining the humidity of the air that is already inside. An air conditioning system may provide ventilation, but many do not at all.

There are a number of problems caused by such systems:

  • Noise caused by air turbulence within the ducts
  • Fan noise transmitted through the ducts
  • Noise in the structure of the building transferring to the ducts and being transmitted through them
  • Fan noise transmitted through the metal of the ducts
  • The ducts create transmission paths through the building

These are the solutions:

Turbulence is reduced by having ducts with a large cross-sectional area. This allows the air velocity to be lower and any remaining turbulence will be lower in frequency.

Any airborne noise can be reduced by the incorporation of plenum chambers. A plenum is a large space through which the air must travel, lined with absorbent material. The air temporarily slows down and allows time for any sound it carries to be absorbed. The ducts are also lined, bearing in mind that the absorbent material must not give off particles (like mineral wool does), unless the air is being extracted. Baffles are generally not used as they increase turbulence.

Noise that would otherwise travel through the metal of the duct is reduced by suspending the ducts flexibly, and by having flexible connector sections every so often to absorb vibration.

Noise from the fan that would otherwise enter the structure of the building can be reduced by mounting the fan on a heavy plinth, itself resting on resilient pads. Obviously, a fan that is intrinsically quiet should be used.

Studio ventilation and air conditioning systems should be installed by contractors who have experience in doing this in a studio environment. Otherwise it is likely that the result will not be satisfactory.

A post by David Mellor
Thursday January 01, 2004 ARCHIVE
David Mellor has been creating music and recording in professional and home studios for more than 30 years. This website is all about learning how to improve and have more fun with music and recording. If you enjoy creating music and recording it, then you're definitely in the right place :-)
Come on the FREE COURSE TOUR