Equipping Your Home Recording Studio - A Free Guide from Audio Masterclass

An Introduction to Equalization - A Free Guide from Audio Masterclass

An Introduction to Compression: Basic Compression - A Free Guide from Audio Masterclass

Tascam Intros FW-1082 FireWire Interface and Control Surface

Thursday January 01, 2004
The FW-1082 features 10 inputs, including four balanced XLR mic inputs with phantom power. Two MIDI inputs and outputs are also included, plus S/PDIF digital I/O. Eight channel strips each feature a 60mm touch-sensitive moving fader and select/solo/mute buttons, and a moving master fader is also provided...
Tascam Intros FW-1082 FireWire Interface and Control Surface

October 29, 2004

The new FW-1082 from TASCAM not only provides audio and MIDI I/O to small studios, but offers a control surface with moving-faders.

The FW-1082 features 10 inputs, including four balanced XLR mic inputs with phantom power. Two MIDI inputs and outputs are also included, plus S/PDIF digital I/O. Eight channel strips each feature a 60mm touch-sensitive moving fader and select/solo/mute buttons, and a moving master fader is also provided. The FW-1082 includes the latest TASCAM software bundle: Cubasis LE 96kHz/48-track recording software, GigaStudio 3 LE streaming sampler and Nomad Factory plug-in demos.

"The FW-1082 offers many of the same powerful audio, MIDI and control surface features of our FW-1884 interface for well under $1,000," raves Jim Mack, Division Manager for TASCAM. "But it's not a 'budget' interface by any measure. The FW-1082 has 10 inputs at 96kHz, and the included Cubase LE software records 48 tracks at up to 96k/ 24-bit resolution, better than many 'pro' applications. Its nine moving faders feel great, and the encoders and transport controls all feel solid and professional. It's an incredible value for anyone breaking into home recording."

The FW-1082's four microphone inputs, two with analog insert jacks, have phantom power for professional condenser microphones. Four additional line inputs and a S/PDIF stereo input add up to 10 inputs simultaneously, each at 96kHz/24-bit audio resolution. Two MIDI inputs and outputs are provided for 32 channels of MIDI synth playback or control. The control surface has nine 60mm touch-sensitive moving faders for silky-smooth control over channel level, pan or aux settings. Four encoders are also available for mix control, as well as transport and jog/shuttle controls. Stereo monitoring is included, and the FW-1082 even mixessignals internally for stand-alone use.

Features:

  • 10-in/4-out audio interface at 96kHz/24-bit
  • Nine 60mm touch-sensitive moving faders
  • Four balanced XLR / 1/4" TRS mic/line inputs with phantom power
  • Four balanced 1/4" TRS line inputs
  • 1/4" TRS insert jacks for channels 1 & 2
  • S/PDIF stereo digital input and output
  • Balanced 1/4" TRS monitor outputs
  • Headphone output with level control
  • Two MIDI inputs and outputs
  • Assignable Footswitch jack
  • Eight channel strips with solo, mute, select, record arm indicator
  • Four assignable encoders control pan, aux level and EQ parameters
  • Transport controls, jog/shuttle wheel, and many other surface controls
  • Emulates Mackie HUI and Mackie Control in addition to the included native mode control plug ins
  • Includes GigaStudio 3 LE
  • Includes Steinberg Cubase LE 48-track 96kHz workstation software

For more information, visit their web site at www.tascam.com

Thursday January 01, 2004 ARCHIVE
David Mellor has been creating music and recording in professional and home studios for more than 30 years. This website is all about learning how to improve and have more fun with music and recording. If you enjoy creating music and recording it, then you're definitely in the right place :-)
Come on the FREE COURSE TOUR