July 24, 2004
Marshall unveiled new handwired amplifiers and matching speaker cabinets at this year's Summer NAMM show. This ongoing series will feature some of the world's most sought after, vintage, all-valve Marshalls. Other than the limited edition Offset JTM45 Halfstack available in 1999 (only 300 were produced worldwide), this represents the first time Marshall has offered a handwired product in recent years. Like the originals, these new amps share simplicity of operation and natural valve tone.
"This new series was created to meet growing public demand, and to pay homage to models that, for many players, represent the ultimate in organic, all-valve guitar tone," explains Marshall Amplification U.S. Product Manager Nick Bowcott. "Our primary objective was to achieve maximum authenticity in terms of components, circuitry, construction methods, materials, specifications, aesthetics, signal path, performance, tonal characteristics and feel," he notes. "All of the original components and materials were used or reproduced, and the original methods of construction employed in the late 1960s were revisited. All transformers -- output and power -- have been meticulously re-created by Dagnall Electronics, and each amplifier's handwired tag-board lives up to the slogan, 'Point-to-Point Perfection'."
The initial handwired sereis models are:
1974X Combo with Tremolo
The original versions of this 18 Watt Amplifier (made from 1966--1968) are now extremely rare and highly sought after. The new, all-valve combo (3 x ECC83/12AX7s* in preamp, 1 x EZ81 rectifier, 2 x EL84s in power amp) features two channels and a valve-driven Tremolo circuit (on Channel 2). Each channel offers two inputs plus volume and tone controls. Channel 2 also has Speed and Depth controls for the Tremolo.
A contributing sonic factor in the original 1974 is the way the sound of the Celestion Greenback speaker softens with age. For the 1974X, Celestion revisited the recipe for the original 20 Watt, ceramic magnet, 15 Ohm, Greenback T1221 speaker, and "aged" it. The result is a new speaker proprietary to Marshall.
Newly added, user-friendly features on the rear panel include two speaker output jacks (the original internal speaker was hardwired to the output transformer) and an impedance selector. In addition, both the Mains and H.T. fuses are now accessible via the rear panel (in the original, fuses were internal and difficult to access and change). Most importantly, these new features have no tonal impact on the amplifier, according to Marshall.
1974CX 1x12" Speaker Cabinet
Designed to partner with the 1974X combo, the 1974CX is also loaded with the proprietary, "aged," 20 Watt Celestion Greenback T1221 speaker.
The original versions of this new 20 Watt, all-valve (2 x ECC83s in preamp, 2 x EL84s in power amp) Lead and Bass 20 Head (made from 1967--1973) are now highly collectable. Its two channels -- Lead and Bass -- both boast the same, simple features: two inputs (High and Low Sensitivity) and controls for volume and tone.
To enhance the user-friendliness of the 2061X, an impedance selector has been added to the rear panel and both the Mains and H.T. fuses are now accessible via the rear panel.
2061CX 2x12" Speaker Cabinet
This compact, 60 Watt, mono 2x12" cabinet has an angled front and is the perfect partner for the 2061X head. It sports Salt and Pepper (a.k.a. Grey Basket Weave) grille cloth, metal handles and two 30 Watt, Celestion G12H reissue speakers.
Pricing and Availability:
All four of the introductory models in this handwired series will be available in September 2004, with US MSRPs as follows:
For more information, visit their web site at www.marshallamps.comCome on the FREE COURSE TOUR
Set up your home recording studio in the very best way possible. Learn how to select equipment and solftware all the way through from microphones to monitors. Learn more...
Are you making these 4 simple mistakes again and again in your home recording studio? They are easy to identify and avoid, so you don't have to. Learn more...