How much mastering does a Pink Floyd soundalike band need?
Make an attention-getting lo-fi introduction for a track
Develop your DAW skills by making a ringtone using edits and crossfades
How would you set microphones for a teleconference? This is real sound engineering in practice.
How to set a graphic equalizer
Are 18 bits enough for tech metal? [with audio]
A microphone with FOUR diaphragms! Really?
What is production? Part 4: Mixing
An example of bad audio with an analysis of the problems - Sept 2017
An investigation of the pre-delay parameter of the Lexicon 480L reverb plug-in
Subscribe to access our latest, up-to-the-minute articles with hints, tips and adventures in audio in the weekly Audio Masterclass Newsletter.
The starting point for the sound themselves is obviously the Oscillator Bank. Some other synths of the time had only one or two oscillators, but the Minimoog has three and the difference is vast. Each oscillator can be set to ranges from a basso profundo 32 up to tin whistle 2. The description as a certain number of feet corresponds to the way church organ pipes are labelled. A pipe of 8 length for example will produce the note C two octaves below middle C on the piano. The overall tuning of the instrument, for which there is a knob in the Controllers section, affects all three oscillators equally, but Oscillators 2 and 3 can have offsets applied which are normally used to thicken the sound up. I cant get over the fact that you can just reach out and do this. You dont have to call up the Oscillators page, move the cursor to the right spot and hit a nudge button several dozen times to do it. You just do it. Each oscillator can be set to one of six waveforms providing different amounts of high frequency harmonics. Oscillator 3 has an additional switch, the function of which I shall come onto shortly.
Moving to the right, there is the Mixer section. On the original Minimoog this is rather awkwardly laid out since the two additional sound sources, the noise generator and the external source, are on the wrong side to make sense, and they split up the oscillators. The Midi Mini arranges this much more sensibly. Each source has not only an on/off switch but a level control so you can set the right blend. My first inclination is to set everything to 10 and go from there!
The Modifier section is the heart and soul of the Minimoog. The upper modifier is the VCF (voltage controller amplifier) and the lower the VCA (voltage controller amplifier) and they both have envelope controls which respectively control the changes in timbre and level over time. Looking at the the simpler VCA envelope generator we see that there are only three controls, for Attack, Decay and Sustain. Whatever happened to the Release parameter that other synths have? The answer is that there is an additional Decay switch next to the keyboard, or in the oscillator section on the Midi Mini, which can throw in a fixed amount of release. Not subtle exactly, but it seems to offer enough control, and anyway this is a classic instrument so we should be prepared to accept a few foibles. I know that you know what the three controls here do so I wont be boring but progress upwards to the more complex filter. On the top there is the cut off Frequency control which affects the brightness of the sound. At some stage or other you may have heard that the Moog filter used to be considered beyond compare in the world of synthesis. Let me tell you that it still is. The 24 decibel per octave slope gives it the cutting edge that other filters sadly lack even now. The Filter Emphasis Control performs the function that we would expect to be labelled Resonance these days, and the Amount of Contour simply means how much effect the filters three envelope controls have on the sound. From what you know now, you can get a massive variety of sounds, and there is still a whole lot more to come.Come on the FREE COURSE TOUR