A brief introduction to acoustic treatment
When using a drum virtual instrument, should you record each drum to its own individual track?
An investigation of the pre-delay parameter of the Lexicon 480L reverb plug-in
Avid and Apple conspire to heist 9 decibels of level
How to set a graphic equalizer
What would happen if a spider got into your microphone?
Can you hear the difference between a square wave and a sine wave?
A brief introduction to soundproofing
Setting the gain control on your audio interface for recording
How to get started quickly in home recording
Subscribe to access our latest, up-to-the-minute articles with hints, tips and adventures in audio in the weekly Audio Masterclass Newsletter.
BackLine Engineering today announced ZenTone7™, a class-A tube amp combining a vintage design with several advanced features. Control settings can be saved as presets while maintaining an all-tube signal path. It can accept a wide array of tubes without re-biasing and allows on-the-fly switching between three different preamp gain structures and four output tube configurations. This allows you to achieve a wide variety of classic tube amp tones at low to medium volume settings.
ZenTone7 is a seven-watt class-A design employing a 250V all-tube circuit that can be connected to either a 4-ohm or 8-ohm speaker cabinet. You can select a single stage preamp or a dual stage preamp using one of three preamp gain structures. You can also select between an EL84 or octal output tube and whether the output tube operates in Pentode or Triode mode. In Triode mode, the amp produces a darker tone at a reduced power level for more tonal options. ZenTone7 provides the convenience of storing all amp settings in one of 64 preset locations effectively creating a 64-channel tube amp. As a practice or recording amp, it can deliver great output tube overdrive at reasonable volume settings through a speaker cabinet, or while sending its direct output signal to a mixing board or audio interface device.
With its internal speaker load and speaker emulation circuit, the XLR or unbalanced direct output captures the tone of the entire tube amp signal path including the output transformer. When the external speaker cable is unplugged, the internal speaker load is engaged. Use a standard latching footswitch to cycle through different preset groups or select presets and change control settings from an external MIDI source. With the free Windows editing software, the amp can be completely controlled using MIDI. For example during recording, you can control the amp tone remotely from the mixing room.
The following is a list of ZenTone7 features:
You can check out some of the demo tracks at www.backline-eng.com. ZenTone7 is shipping now and will be initially sold directly from the factory at a selling price of $995.
For more information, visit their web site at www.backline-eng.com