An Introduction to Equalization - A Free Guide from Audio Masterclass

Equipping Your Home Recording Studio - A Free Guide from Audio Masterclass

An Introduction to Compression: Basic Compression - A Free Guide from Audio Masterclass

How to build a soundproof wall or partition

A post by David Mellor
Wednesday October 25, 2006
How to construct a soundproof wall using bricks and mortar, or using a dry partition.
How to build a soundproof wall or partition

Whatever material the wall is made out of, it is better to use two thin walls spaced apart rather than one thick one of equivalent mass.

Remembering that soundproofing is best achieved by reflection, and that reflection occurs at the boundary between one material and another, it makes sense to provide four boundaries rather than two.

At first thought, it may seem that if a partition has a sound transmission class (STC) of say 35 dB, and two such partitions are provided, then the overall STC will be 70 dB. This is not the case.

By doubling the mass you get an extra 6 dB, and by spacing apart the two leaves of the partition you might gain another 3 dB. This may not sound like much, but it costs hardly anything so it is worth having.

The reason why you don't get twice as many decibels of sound reduction is that the two leaves remain coupled together.

In fact the more closely they are coupled, the more the object of the exercise is defeated.

Double-leaf brick walls ('cavity walls') are often constructed using wire or plastic ties which couple the leaves together for mechanical strength.

For a wall that is designed for good soundproofing, the use of such ties should be minimized.

Care should be taken not to allow cement to fall onto the ties. In normal building, this would not matter.

Also, builders are known to have a habit of depositing rubbish between the leaves of a cavity wall.

You probably didn't want to know this but it ranges from food waste to plastic bags containing human excrement. This of course must not be allowed to happen as it couples the leaves of the partition.

The space between the partitions should be filled with absorbent material such as mineral wool.

This is where absorbent material does have a place in soundproofing.

If the cavity is left empty, sound will bounce back and forth between the leaves and some of the reflected energy will end up being transmitted. If this can be absorbed significantly, then the insulation will be better.

A post by David Mellor
Wednesday October 25, 2006 ARCHIVE
David Mellor has been creating music and recording in professional and home studios for more than 30 years. This website is all about learning how to improve and have more fun with music and recording. If you enjoy creating music and recording it, then you're definitely in the right place :-)