Next enrollment Monday May 1 to Friday May 5, 2017

An Introduction to Compression: Basic Compression - A Free Guide from Audio Masterclass

An Introduction to Equalization - A Free Guide from Audio Masterclass

Equipping Your Home Recording Studio - A Free Guide from Audio Masterclass

Q: How can I monitor through headphones and speakers at the same time?

A post by David Mellor
Tuesday December 28, 2010
An RP reader asks: "While recording how do I hear my vocals and music through my headphones and studio speakers at the same time?"
Q: How can I monitor through headphones and speakers at the same time?

Anyone might wonder how this is possible. Do you need two sets of ears to listen to headphones and loudspeakers simultaneously?

Well of course, if you have two people in the studio, you have two sets of ears, so the question is perfectly valid.

I can imagine some scenarios...

  • The engineer needs to check the detail of a signal while not disturbing audio continuity for the other people in the control room.
  • You are recording an electric or electronic instrument in the control room and the performer needs to hear a different mix to anyone else.
  • You're working alone and you simply want to be able to listen on headphones quickly without plugging or switching anything.

There are probably a dozen other good reasons, but I won't go on.

I imagine that the problem is that plugging the headphones into the monitor system automatically switches the loudspeakers off. There are times when you might want this, but it would be nice if it were an option.

I could suggest that you delve inside your equipment and replace the switched headphone socket with an unswitched one. But it might also be that the same volume control handles both the loudspeaker and headphone outputs, so you might find yourself adjusting it every time you swap. (You could change the level setting on the loudspeakers' power amplifier to correct this.)

A better way would be to use a separate headphone amplifier, connected to your system's monitor output, via a splitter cable if necessary.

To wrap up, I would say that if this is causing you a problem, then you should solve it as quickly as possible. There is no good reason for putting up with irritations in the studio - recording to a professional standard is difficult enough already.

A post by David Mellor
Tuesday December 28, 2010 ARCHIVE
David Mellor has been creating music and recording in professional and home studios for more than 30 years. This website is all about learning how to improve and have more fun with music and recording. If you enjoy creating music and recording it, then you're definitely in the right place :-)