An Introduction to Compression: Basic Compression - A Free Guide from Audio Masterclass

An Introduction to Equalization - A Free Guide from Audio Masterclass

Equipping Your Home Recording Studio - A Free Guide from Audio Masterclass

Allen & Heath GS3000 8-Bus Recording Console - with tubes (valves)! (part 2)

A post by David Mellor
Thursday January 01, 2004
The Allen & Heath GS3000 is an 8-buss console. 8-buss consoles are very popular since the combination of eight mixable outputs and direct outputs from the channels (which the GS3000 features) covers virtually every situation you are likely to come across in music studio recording.
Allen & Heath GS3000 8-Bus Recording Console - with tubes (valves)! (part 2)

The Allen & Heath GS3000 is an 8-buss console. 8-buss consoles are very popular since the combination of eight mixable outputs and direct outputs from the channels (which the GS3000 features) covers virtually every situation you are likely to come across in music studio recording. 24-channel and 32-channel frame sizes are offered which give respectively 52 and 68 inputs to the mix. The topology is in-line, meaning that each channel strip contains the monitor controls for one channel of the multitrack, as opposed to the now quite rare split monitoring design where the multitrack monitors are somewhere else on the control surface entirely. As a surprising bonus, the GS3000 includes a two channel valve stage which can be patched into the console wherever necessary, and can also be used as a guitar input preamplifier. I have been saying for a long time that mixing consoles should have high impedance inputs as well as the traditional mic and line inputs, suitable for electric guitars and pianos etc. Here, at last, we have them and with valve warmth too! Although the GS3000 doesn’t have fader automation (which you could hardly expect in its price range) it does have the potential for mute automation, which is really half the battle when it comes to mixing band recordings, and in addition it offers integrated machine control. This means that your multitrack(s) can be away in a machine room somewhere and you can perform all necessary transport and track arming commands right from where you are sitting. This originally was how SSL made their big breakthrough, by incorporating machine control and automation into the console, and Allen & Heath have made a similar breakthrough on a project studio level. Of course machine control is nothing if it isn’t easy to use and gives you the functions you need. We’ll see later whether it does or not. But first…

A post by David Mellor
Thursday January 01, 2004 ARCHIVE
David Mellor has been creating music and recording in professional and home studios for more than 30 years. This website is all about learning how to improve and have more fun with music and recording. If you enjoy creating music and recording it, then you're definitely in the right place :-)
Come on the FREE COURSE TOUR