Akai S1100EX 16 Voice Expansion Unit for the S1100 (part 6)
If anything, Mode 2, or Voice Expansion mode, is even easier than Mode 1. This mode is for when you need to have thirty-two simultaneous voices on the go, or sixteen in stereo. This is usually the case when you are playing sampled piano. Without sufficient voices, the sustain pedal is very difficult to use without note-stealing becoming obvious. Switching into Mode 2 is as easy as switching into Mode 1. When you load some samples in from floppy disk, the S1100EX will load first, and the display will invert to tell you whats going on, and then the S1100 will load the same sample data. When this is done, you basically have a thirty-two voice S1100 at your disposal. All editing procedures will be exactly the same as if you only had an S1100, and when you save data to disk only one set has to be saved because the data is the same in both units.
Keep in mind that the S1100EX adds a whole new S1100 to your rack and youll appreciate that feats like having two different digital effects running at the same time are quite logical. But you may wonder about a couple of other matters, so let me clarify...
Are you a Cue List user on the S1100? The Cue List allows samples to be entered against SMPTE timecode so that they can be played back in sync with a video without having to use an external sequencer or synchroniser of any kind. The S1100 can do this too, but the IB-108 SMPTE reader/generator card isnt supplied as standard, as it is with the S1100.
As I said earlier, further S1100EXs can be added to the SCSI chain, but you only benefit from the added multitimbrality that Mode 1 offers. Although your first S1100EX will add an extra sixteen voices in Mode 2, this doesnt unfortunately mean that another one would add sixteen more. The first sixteen notes would be played on the S1100 and the next sixteen on all subsequent S1100EXs.
An interesting trick that the S1100EXs manual notes is digital mixing for resampling. This isnt specifically an S1100EX feature since you could do it with an S1100 and a DAT machine, but its interesting nonetheless. Heres how: First you need to have an IB-104 digital interface installed in your S1100 which provides a optical and electrical digital inputs and outputs in addition to the digital output that the S1100 has as standard. Make up a complex stack of programs on the S1100EX that you think might be useful if it didnt use up so many voices, and play it back through the digital output into the S1100s IB-104 digital input while sampling digitally. This should give you a sound with several layers but keeping the S1100s full polyphony. You could do this just as easily through the analogue inputs and outputs adding whatever EQ and processing you need. I suspect that having two samplers around will throw up a lot of possibilities that we havent even begun to consider before.