Equipping Your Home Recording Studio - A Free Guide from Audio Masterclass

An Introduction to Compression: Basic Compression - A Free Guide from Audio Masterclass

An Introduction to Equalization - A Free Guide from Audio Masterclass

A brief introduction to microphone techniques for the home recording studio

A post by David Mellor
Wednesday July 31, 2013
Microphone technique is the art and skill of selecting an appropriate microphone for the job in hand, in terms of type, model and sometimes even the individual microphone, as microphones that were identical when new can come to sound different as they age.
A brief introduction to microphone techniques for the home recording studio

In a professional studio, where there the control room and recording area are separated, the engineer will position the microphone approximately according to his or her experience. He or she will then listen to the instrument from the control room while an assistant moves the microphone according to the engineer's instructions. In this way, the engineer can capture the absolute best sound from the instrument. Clearly this isn't possible if you are working alone, but if you listen on headphones (preferably the closed type, which have better sound insulation) as you move the microphone, it will be possible to find the best position.

Miking a single instrument

Shure SM57 dynamic microphone positioned for a Fender Champ guitar amplifierAs a rule, the starting point for microphone positioning is the position you would normally listen to an instrument from. The microphone will usually have to be placed closer than that however, so as not to pick up too much reverberation from the room. Having said that, if you want to be creative there is no reason you shouldn't place the mic anywhere you like, as long as it captures a sound that pleases you.

Miking a vocal

Although it is common practice to experiment with different microphones, to see which suits the singer you are working with best, positioning is straightforward. The most common technique is to place the microphone directly in front of the singer's mouth, with a pop-screen in between to protect the mic against blasts of air which would produce audible pops in the recording. The sound texture will change according to the distance of the mic from the singer's mouth. The engineer would consider this, with regard to the style of the music, when positioning the mic. As always, the best results are obtained by experiment.

Stereo microphone techniques

A stereo recording can be made with two microphones. They can be positioned close together (the coincident crossed pair technique has them as close as physically possible) and pointed left and right. Or they can be spaced apart for a recording that has more of a sense of actually being there in the room. It is worth noting that the spaced technique is harder to control and may result in a wandering stereo image, or a recording that doesn't work well if played in mono, as on a TV set, portable radio or center-cluster PA system.

It is perfectly possible to record an orchestra, choir or any acoustic ensemble of any size with just two microphones set up as a stereo pair. It takes time however to find exactly the best position for them, so usually a stereo pair is used in conjunction with individual mics (for a small ensemble) or sectional mics (for an orchestra). For a choir with soloists, the bulk of the choir can be miked with a stereo pair, and the soloists given their own individual mics. This way of working is faster and more controllable than a stereo pair alone.

A post by David Mellor
Wednesday July 31, 2013
David Mellor has been creating music and recording in professional and home studios for more than 30 years. This website is all about learning how to improve and have more fun with music and recording. If you enjoy creating music and recording it, then you're definitely in the right place :-)
Come on the FREE COURSE TOUR